Sanyo DSR-3506P 用户手册
SCREEN SET
5
English
91
4
Turn the shuttle dial clockwise.
“T-1” starts to flash for the time period.
5
Turn the jog dial to select T-1, T-2, T-3,
or T-4 for the time period, and then turn
the shuttle dial clockwise.
or T-4 for the time period, and then turn
the shuttle dial clockwise.
After setting the period, the cursor moves to channel 1 for
the “MAIN”.
the “MAIN”.
6
Turn the jog dial clockwise or counter-
clockwise to move the cursor to the
main-monitor or monitor 2 channel to be
changed.
clockwise to move the cursor to the
main-monitor or monitor 2 channel to be
changed.
7
Turn the shuttle dial clockwise.
“ON” flashes.
8
Turn the jog dial to select “ON” or
“OFF”, and then turn the shuttle dial
clockwise.
“OFF”, and then turn the shuttle dial
clockwise.
After confirming this setting, the cursor moves one position
to the right.
to the right.
9
Use the same procedure to set the
remaining channels.
remaining channels.
10
Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
the normal screen.
z
When setting a number of time periods together, use
the jog dial to move the cursor to the next period after
completing step 9, and repeat the process from step 4.
the jog dial to move the cursor to the next period after
completing step 9, and repeat the process from step 4.
z
The time period for “T-1” through “T-4” changes to that
of “TIME PERIOD A” or “TIME PERIOD B” on P.50.
of “TIME PERIOD A” or “TIME PERIOD B” on P.50.
EXIT
e00_l8hbe_xe_7.book Page 91 Tuesday, April 27, 2004 10:35 AM