Bushnell 950 用户手册

STEP 1 – Main Frame Assembly

a) Remove (4) Allen Bolts, (4) Washers,

(2) Nylon Nuts and (2) Nut Caps from
Main Frame, see Figure 1.

b) Position Left and Right Roller Tubes

behind Main Frame with Roller Tracks
on top and rear Allen Bolts facing
each other.

c) Slide Left and Right Roller Tubes into

Main Frame, align bolt holes and
secure with (4) Allen Bolts, (4) Washers
and (2) Nylon Nuts removed in Step 1a.
Tighten bolts with Allen Wrench provided
and install (2) Nut Caps.

d) Remove (2) Allen Bolts and (2) Washers

from rear of Left and Right Roller Tubes.

e) Position Stabilizer Bar between Right and

Left Roller Tubes, align bolt holes and
re-install (2) Allen Bolts and (2) Washers
that were removed in Step 1d. Tighten
bolts with Allen Wrench provided.

STEP 2 – Foot Platform Installation

a) Remove (2) Allen Bolts, (2) Washers

and (2) Nylon Nuts from the underside
of each Foot Platform, see Figure 2.

b) Rotate Crank to the down stroke

position and slide (1) Foot Platform
onto either Front Foot Tube, see
Figure 2.

c) Align bolt holes and secure using

(2) Allen Bolts, (2) Washers and
(2) Nylon Nuts removed in Step 2a.

d) Lower Foot Platform and position

Roller in Roller Track, see Figure 2.

e) Repeat Steps 2b - 2d to install the

remaining Foot Platform.

Figure 1 - Assemble Main Frame

Figure 2 - Install Foot Platforms

left front

foot tube

main

frame

M8 x 90mm

allen bolt

left roller tube

right roller

tube

M8 x 15mm
allen bolt

right front
foot tube

M8 washer

roller track

M8 x 20mm

allen bolt

stabilizer

bar

M8 washer

nut
cap

M8
nylon
nut

roller track

foot platform

M8 x 80mm

allen bolt

left front

foot tube

main

frame

right front
foot tube

M8
nylon
nut

M8 washer

M8 x 80mm
allen bolt

washer

roller

crank