Motorola DSR315 用户手册

20

 

• Press the EXIT key on the remote control. Then press the number keys for the 

authorization channel. 

• Press the OPTIONS key on the remote control. The Options menu will appear.

• From the Options menu, 

select option 6 (Change 
System Settings), and 
the System Settings 
menu will appear.

• Select option 4 (Check 

System Status), and the 
System Status menu will 
appear. Line A shows 
your Unit ID number.

• Telephone the company 

that provides your 
programming 
subscription, and ask to authorize your unit. 

• When your receiver has received the authorization message the Trip Counter 

on the Installation Settings menu will advance.

You will need to make changes to connect your VCR.

• Connect the top/left TV terminal on the back panel of the receiver to the IN 

terminal on the VCR. If you had already connected this cable to your TV you 
must disconnect and connect it to your VCR.

• Connect the OUT terminal(s) on the VCR to the VHF IN terminal(s) on the 

TV.

Complete the following steps if you only plan to connect the satellite receiver to 
an audio/video monitor:

• Using standard RCA-type audio/video cables, connect the top/left  TV 

(VIDEO output) terminal on the rear panel of the receiver to the video input 
terminal on the monitor (or TV using the baseband inputs).