DISH Network 138410 用户手册

When the software upgrade is complete, you will see a second message that 

the receiver's memory is now being programmed. This message may 

disappear and your screen may go blank for a few minutes. This is normal 

and does not indicate a problem with the receiver.

8. When the software upgrade is complete and the receiver resets itself, you 

should now be able to order your programming by calling 1-800-333-DISH 
(3474). See Chapter 1, Introduction.

When the receiver has been activated with qualifying DISH Network 

programming, use the following steps to select the desired HDTV format:

1.  Consult your HDTV user’s guide for the HD format that the TV supports 

(1080i, 720p or 480p). If required, set up the HDTV to display in the format 
you desire. Some HDTV's will automatically adjust to the resolution setting 
of the receiver.

2. Press MENU 6-1-9 on the receiver remote control to bring up the receiver 

HD Setup screen. 

3. Select the HD format under TV type that matches the format your TV is set 

up to support. Press

 Save

 to save these settings.

4. If you were using the standard definition A/V input, switch your HDTV to 

display from its DVI or YP

 component inputs. Consult your HDTV 

user guide for instructions.

5. Confirm you are watching picture from the receiver over the HDTV 

connections.