DISH Network 138410 用户手册

The receiver starts the VCR recording, but does not turn on the VCR.

 

Make sure you leave the VCR turned on. You must also have a videotape in 
the VCR.

1. Make sure the VCR is connected to one of the receiver outputs and is 

set to display on your TV. Consult your VCR user’s guide.

2. Get the VCR device code from the table in Chapter 5.

3. Press the MENU

button. 

4. Select the 

 option, then the 

 

option, then the 

 option.

5. Enter the first 3-digit code number from the table using the NUMBER 

PAD buttons.

6. Make sure the VCR is turned on. Insert a video tape.

7. Select

 Test

. The receiver displays a message warning you to make sure 

the VCR is turned on.

8. Press the SELECT/OK button to start the test. Your VCR 

records for a few seconds, stops, and then rewinds. The 
receiver displays a message saying that your VCR test is 
complete. Follow the instructions on the message. 

9. If your VCR did not do the test, enter another code from 

the table, and then repeat steps 2 through 6.

10. When you have found the correct VCR code select the 

 option to 

save the VCR code you entered, and return to the 

 menu.