DISH Network 138410 用户手册

You can set up the remote to control other devices using the device codes 
listed on page 86. In the following instructions, the column on the left 
contains the instructions and the column on the right provides additional 
information.

1. Turn the device on.

Use the device’s front panel buttons 
or its remote control.

2. Find the brand name of the 

device in the tables starting 
on page 86. 

If the brand isn’t listed, see Setting Up 
Using Device Codes Scan on page 86.

3. Press and hold the mode 

button until all the other mode 
buttons light up, and then let 
go of the button. The mode 
button flashes.

For example, hold TV for a TV until 
all of the other mode buttons light. 
When you let go, TV will flash.

4. For AUX mode only. Press 0 

for a second TV, or 1 for a 
second VCR, or 2 for a tuner, 
or amplifier.

This step is for programming which 
kind of device that should be 
programmed in AUX mode. If you’re 
not programming in AUX mode, 
continue to step 5.

5. Enter one of the three-digit 

device codes from the table 
using the NUMBER PAD 
buttons. 

The three-digit device code should be 
for the brand name of your device that 
you found in step 2.

6. If you want to program 

Limited Mode, press 1. If not, 
skip to step 7.

See Limited Mode for more 
information.

7. Press POUND (#). 

If you entered the code correctly, the 
mode button flashes three times.

8. Press POWER to turn off the 

device. If the device does not 
turn off, go to step 10.

If the code works, the device should 
turn off.

9. Turn the device back on and 

try some other buttons to 
make sure they work. If the 
code works for other buttons, 
stop here.

Sometimes POWER works when 
other buttons don’t. 

10

If the code doesn’t work, redo 
steps 3 through 9 with another 
device code from the tables.

Try every code listed for your brand 
until one works for your device.