DISH Network Solo 351 用户指南

4. For 

, select either 

 (for off-air channel numbers) or 

(for cable channel numbers).

5. Highlight the number under 

.

6. Use the UP and DOWN ARROW buttons to change the modulator 

channel to one of the following:
•

 - Select a channel between 

 and 

.

•

 - Select a channel between 

 and 

.

7. Select 

 to save the changes.

8. Change the channel on your TV(s) to match the channel(s) you selected.
9. If desired to remind you of which TV channel to tune to get satellite 

programming, place a channel sticker near or on your TV to indicate the 

correct channel.

10. If you changed your TV2 Out channel, repeat Programming the 

Recover Button for a Remote TV. 

You must keep the receiver connected to an active telephone line. 

Otherwise, you may not be able to order pay per view programs or use all of 

the DISH Interactive features.

: You may be able to use a wireless telephone extender. However, this 

may not support all the features of this receiver, such as Caller ID.

: If you have a Digital Subscriber Line (DSL), you may have to install 

a DSL filter between the receiver’s back panel PHONE JACK and the 

telephone wall jack to successfully connect with the DISH Network. You 

can obtain a filter from your DSL provider.

Run a telephone cable with a standard RJ-11 connector from the receiver’s 

back panel Phone Jack to an active telephone connection.

You must also set up the receiver for your telephone system (touchtone or 

rotary/pulse), and set a telephone number prefix, if you need a prefix to 

make an outside call.
1. Display the 

screen by pressing MENU-6-1-4.