DISH Network 512 用户手册

The 

 is used if you want the satellite 

receiver to connect the tuner of the nearby TV to an over-the-air 

antenna or cable-TV distribution system when the satellite 

receiver is turned off or when using the TV/VIDEO button on 

the remote control. Use a coaxial cable to make this connection 

to an over-the-air (OTA) antenna or cable-TV system. The 

 connection is color-coded black. Your TV 

must be connected to the 

 output to use this feature.

Do not use any 

 connections to connect to your TV. These connections are 

inactive.

The 

 connections are used to 

receive satellite TV signals from the dish 

antenna. The connection is made using 

RG-6 coaxial cable. The 

 

connections are color-coded blue.

: Both 

 connections must be used for proper operation of this 

dual-tuner receiver. You may use a DISH Pro Plus input-signal separator.

The 

 port receives UHF Pro signals  

from an optional IR/UHF Pro remote control so that it can 
control menus and programming from another room. 
Connect this antenna here, and place it so that it does not 
touch anything. If you do not connect the antenna, you 
cannot use a UHF-enabled remote to control the receiver’s 
menus and programming. The 

port is color-coded green. 

The 

 is used to connect the receiver to an 

active telephone line. Use a standard RJ-11 telephone cable 

assembly to make the connection. You must keep the receiver 

connected to an active telephone line. Otherwise, you may not 

be able to order pay-per-view programs, use all of the DISH 

Interactive features, or access other customer services from DISH Network.

Remote controls give you easy access to all the features of your satellite 

receiver. You can set up a DISH Network four-component remote to control the