GSI Outdoors PNEG-1521 用户手册

46

PNEG-1521     Commercial Direct Gear Drive Bin Sweep Auger

4.  The sweep flight and
       shield are no longer
      moving.

A.  Too much drag.

A1. Check the clearance

between the shield and the
bin floor. Make sure there is
room for  the auger to move.
Adjusting the shield may be
necessary.

B.  Worn sweep wheel.

B1. The sweep wheel wears down

over time. Replace the wheel.

C.  Unconditioned grain.

C1. Moisture and/or insects

can cause the grain to
harden or “cake-up”.
Disconnect and lockout
the power to the auger
before going into the bin to
correct this problem or to
address any other
problem.