Multi-Tech Systems MVP-2410 用户手册

5. Open the HyperTerminal program.

6. Use HyperTerminal  to receive and record console messages from the

MultiVOIP unit.  To do so, set up HyperTerminal as follows (setup shown is
for Windows NT4; details will differ slightly in other MS operating
systems):

  In the upper toolbar of the HyperTerminal screen, click on the

Properties button.

  In the “Connect To” tab of the Connection Properties dialog

box, click on the Configure button.

  In the next dialog box, on the “General” tab, set “Maximum

Speed” to 115200 bps.

  On the “Connection” tab, set connection preferences to:

:  8

:       none

:   1

  Click OK twice to exit settings dialog boxes.

7. Make VOIP call.

Make call from an extension of
the local PBX.

Make call on a  local phone line
accessing PSTN directly or
through key system