Samsung ITP-5121D 用户手册

This option will allow CO calls that directly ring your phone to auto answer. When
a CO call arrives at your station and this option set for ON your phone will sound
two beeps, the same as when a screened transfer is completed, and you will be
connected to the CO call. In order for this option to work the station must also be
programmed for auto answer 

•

While on hook, press TRANSFER and then dial 110.

•

Dial 151 to turn Auto Answer CO on or 150 to turn it off.

•

Press TRANSFER to store your selection.

NOTE: Outside lines must ring your station directly for the Auto Answer CO to
work. Lines ringing a station group will not cause your phone to Auto Answer.

This option allows you to view the name associated with a speed dial number as
it is dialed.

•

With you handset on-hook, press TRANSFER and then dial 110.

•

Press 111 to turn DISP SPDNAME on or 110 to turn it off.

•

Press TRANSFER to store your selection.

This feature allows display keyset users to review Caller ID information for calls
sent to their stations.This list can be from ten to fifty calls in a first in, first out basis.
The list includes calls that you answered and calls that rang your station but that
you did not answer. When reviewing this list, you can press one button to dial the
person back. The system must be using LCR to dial the stored number.

•

With you handset on-hook, press TRANSFER and then dial 110.

•

Press 121 to turn CID REVIEW ALL on or 120 to turn it off.

•

Press TRANSFER to store your selection.

This option allows you to receive OHVA calls via the speaker while you are on the
handset.

•

With you handset on-hook, press TRANSFER and then dial 110.

•

Press 131 to turn AUTO CAMP-ON on or 130 to turn it off.

•

Press TRANSFER to store your selection.

41

40

Your keyset may be equipped with a Headset mode button. If it is so equipped
pressing this button while the light is out will cause the keyset to enter headset
mode and the light will illuminate to indicate this. Pressing the button while the
light is lit will cause the keyset to return to handset mode and the light will go out.

On your phone system your keyset’s keypad can be made “live” or “hot” so that it is
not necessary to lift the handset or press the SPEAKER button before you begin
dialing. Calls can be made and features activated by simply dialing the C.O. line
number, trunk group access code, intercom number or feature access code. To ac-
tivate this feature:

•

With the handset on-hook, press TRANSFER and then dial 110.

•

Dial 031 to turn the Hot Keypad on or 030 to turn it off.

•

Press TRANSFER to store your selection.

You can hear a short beep (confirmation tone) each time you press a button on the
dial pad. This tone can be turned on or off.

•

While on-hook, press TRANSFER and then dial 110.

•

Dial 040 to turn tones off or 041 to turn tones on.

•

Press TRANSFER to store your selection.

This feature allows you to hear the remaining portion of an ongoing internal page
after you return your keyset to idle. To enable this feature:

•

With the handset on-hook, press TRANSFER and then dial 110.

•

Dial 051 to turn this feature on or 050 to turn it off.

•

Press TRANSFER to store your selection.

This feature automatically answers ringing calls when you lift the handset or press
the SEND button. This method will always answer calls in the order they arrived at
your keyset.When you turn ring preference off, you must press the flashing button
to answer a call, allowing you to answer calls in the order you choose.

•

With the handset on-hook, press TRANSFER and then dial 110.

•

Dial 061 to turn ring preference on or 060 to turn it off.

•

Press TRANSFER to store your selection.