Samsung ITP-5121D 用户手册

The fifth item [5. SYSTEM SERVER SET UP] sets or modifies settings related to
registering the phone to the MCP. You can obtain this information from your sys-
tem administrator. The screen below is displayed.

You can set/modify the IP address of the MCP at the [1. SERVER IP ADDRESS] item.
The screen below is displayed when you enter the item. The server IP is the IP
address of the MCP2/MCP.

You can confirm the current IP address of the MCP at the LCD panel. The address
is left blank if it is not set. Use the dial buttons from [0]-[9], and [

] to set the IP

address and press the [ENTER] button among the navigation buttons to save and
exit. Select the [2. SERVER ID] item.

You must input the ID assigned to your ITP phone. See your phone system admin-
istrator to get this value. Press the [ENTER] button to save and exit. Select the [3.
SERVER PASS] item.

You must input the password associated with your ID. See your phone system
administrator to get this value. Press the [ENTER] button to save and exit.

From the main menu, select the seventh item [7. REBOOT] to save all modified
settings and reboot the ITP-5121D phone.

1.SERVER IP ADDRESS

INPUT SERVER IP ADDRESS

 

xxx.xxx.xxx.xxx 

NOTE: In the [3. NETWORK SET UP MENU], [1. NETWORK MODE SETUP] option,
when [2. DHCP] is selected the IP address, Netmask, and Gateway will not be dis-
played on the LCD.

The fourth item [4. LOAD & UPGRADE SET UP] sets or modifies the IP phone’s
software version. Use extreme caution when upgrading the keyset.

Select the  [4. LOAD & UPGRADE SET UP] item and move to the lower level. The
screen below is displayed.

Select option [1. UPGRADE TFTP SERVER] and enter the IP address of the TFTP
server containing the ITP software. Use  [0]-[9] and [

] button to enter the IP

address. Press ENTER to save.

Select option [2. UPGRADE START] to start the upgrade process.

1.UPGRADE TFTP SERVER

 

2.UPGRADE START

 

14

15

INPUT SYSTEM ID

INPUT SYSTEM PASSWORD