Siemens V1.2.33 用户手册
Listing Connected IP Phones
14
Device type
The Device type column lists the optiPoint devices each with an assigned
icon. This column could look as follows in another network:
icon. This column could look as follows in another network:
If you hid the Device type column (
Æ page 11) and the list contains differ-
ent device types, the following message will prompt you to display the col-
umn after the scan:
umn after the scan:
If you do not display the Device type column, you will be unable to config-
ure any devices as the Configure Selected Devices function will not be
available
ure any devices as the Configure Selected Devices function will not be
available
Stopping a Scan
You can interrupt a scan at any time. Call with Stop from the Scan menu
on the menu bar.
on the menu bar.
Resetting the Scan Result
If the result is unsatisfactory, for example, or if you want to change or ex-
tend the IP address range, you can reset the values in the current device
list. Call with Reset from the Scan menu on the menu bar.
tend the IP address range, you can reset the values in the current device
list. Call with Reset from the Scan menu on the menu bar.