Mitsubishi Electronics QD75MH1 用户手册
2 - 4
MELSEC-Q
2 SYSTEM CONFIGURATION
2.2 Component list
The positioning system using the QD75MH is configured of the following devices.
No. Part
name
Type
Remarks
1 Positioning
module
QD75MH1
QD75MH2
QD75MH4
QD75MH2
QD75MH4
QD75MH
Number of control axes
MH: SSCNET model
2
GX Configurator-
QP
QP
SW D5C-QD75P-
E
E
Refer to GX Configurator-QP Operating Manual for details.
3 Personal
computer
DOS/V personal
computer
computer
(Prepared by user)
Refer to GX Configurator-QP Operating Manual for details.
Refer to GX Configurator-QP Operating Manual for details.
4 RS-232
cable
QC30R2
(Prepared by user)
An RS-232 cable is needed for connecting the CPU module with a
personal computer (DOS/V).
For details, refer to GX Configurator-QP Operating Manual.
An RS-232 cable is needed for connecting the CPU module with a
personal computer (DOS/V).
For details, refer to GX Configurator-QP Operating Manual.
5 USB
cable
–
(Prepared by user)
A USB cable is needed for connecting the CPU module with a personal
computer (DOS/V).
For details, refer to GX Configurator-QP Operating Manual.
A USB cable is needed for connecting the CPU module with a personal
computer (DOS/V).
For details, refer to GX Configurator-QP Operating Manual.
6 Servo amplifier
–
(Prepared by user)
7
Manual pulse
generator
generator
–
(Prepared by user)
Recommended: MR-HDP01 (Mitsubishi Electric)
Recommended: MR-HDP01 (Mitsubishi Electric)
8
SSCNET cable
1
(For connecting
between the
QD75MH and the
servo amplifier)
between the
QD75MH and the
servo amplifier)
–
(Prepared by user)
Cables are needed to connect the QD75MH with the servo amplifier.
Cables are needed to connect the QD75MH with the servo amplifier.
9
Cable 1
(For connecting
between the
QD75MH and the
external device)
(For connecting
between the
QD75MH and the
external device)
–
(Prepared by user)
Cables are needed to connect the QD75MH with the external device.
(Prepare them referring to the manuals for the connected devices and
information given in 3.4.2 of this manual.)
Cables are needed to connect the QD75MH with the external device.
(Prepare them referring to the manuals for the connected devices and
information given in 3.4.2 of this manual.)
1: The SSCNET cable connecting the QD75MH and servo amplifier, external device connection connector has been
prepared. Refer to the below table.