Adtran 612 用户手册

下载
页码 264
Total Access 600 Series System Manual
Section 4  User Interface Guide
61200624L1-1B
© 2004 ADTRAN, Inc.
69
S
YSTEM
 U
TILITY
 > T
RACEROUTE
 > T
RACE
 T
ARGET
Specifies the IP address of the remote system to trace the routes to.
S
YSTEM
 U
TILITY
 > T
RACEROUTE
 > M
AXIMUM
 H
OPS
Specifies the maximum number of router exchanges allowed when traveling to the final destination 
(specified using the 
T
RACE
 T
ARGET
 field) Range is 
1
 to 
30
. Default is 
30
.
S
YSTEM
 U
TILITY
 > T
RACEROUTE
 > T
IMEOUT
 (
IN
 
SECS
)
Specifies the maximum delay (in seconds) given to a host (along a path to the final destination) to respond 
to the probe datagram sent before considering the packet a failure.
S
YSTEM
 U
TILITY
 > T
RACEROUTE
 > R
ETRIES
Specifies the number of times the probe datagram is sent to each host (along the path to the final 
destination).
S
YSTEM
 U
TILITY
 > T
RACEROUTE
 > B
EGIN
 T
RACEROUTE
Activates the traceroute process.
S
YSTEM
 U
TILITY
 > R
ESET
 U
NIT
Selecting this activator will initiate a soft reset of the unit.
S
YSTEM
 U
TILITY
 > T
ERMINAL
 M
ODE
Selecting the terminal mode gives the user a command-line prompt to perform utilities such as pings, 
traceroutes, resets, firmware updates, configuration, and more. 
T
ERMINAL
 M
ODE
 can also be accessed by 
using the shortcut keys <Ctrl+T> from other menu screens. From this command-line prompt, you can:
Perform a reset with the command "reset"
Perform a complete factory restore with the command "factory_reset"
Configure the unit. The unit has the ability to download a text file which contains the configuration of 
the entire unit. This configuration may then be altered in a text editor, and then uploaded to a unit. (See 
DLP-13, Saving and Loading Text Configuration using Terminal Command Line, for further 
assistance.)
Debug and troubleshoot. This function would be carried out with the assistance of ADTRAN Technical 
Support.
Start and stop the fail-safe timer for the auto-config feature.
Perform a firmware upgrade via TFTP. 
upgrade_firmware hostname filename
Use the save command to write the entire configuration to flash.
Display the unit’s MAC address with the command mac.
Perform a ping or extended ping. Syntax is:
ping hostname/address [repeat xx] [size xx] [timeout xx] [source xx] [noNat]