Panasonic KX-TS4100 用户手册

50

For assistance, please visit http://www.panasonic.com/phonehelp

You cannot program 
function items, such 
as the dialing mode. 

L

Programming is not possible while in the talk or intercom 
mode.

L

Do not pause for over 30 seconds while programming.

L

Make sure that the unit is in standby mode. 

Static is heard, sound 
cuts in and out.

L

If your unit is connected to a telephone line with DSL 
service, we recommend connecting a noise filter between 
the unit and the telephone line jack (see “Connecting 2 
two-line telephone jacks” on page 18, “Connecting four 
single-line telephone jacks” on page 19). Contact your 
DSL provider for details.

You cannot redial the 
last number dialed.

L

If the last number dialed was more than 32 digits long, the 
number cannot be redialed.

L

Access numbers entered after pressing {*} (TONE) will 
not be included when redialing.

You cannot have a 
conversation using 
the headset.

L

Make sure that {HEADSET} is pressed.

L

Make sure that the headset is plugged into the headset 
jack properly (see “Connecting the optional headset to the 
unit” on page 44).

During a power 
failure, you cannot 
make or answer a 
call.

L

Make sure that a battery has been installed properly (see 
“Battery installation” on page 12).

L

The battery may have been discharged. In that case, 
replace the battery with a new one (see “Battery 
replacement” on page 12).

The intercom does not 
work.

L

DSL Internet connection and KX-TS4100/KX-TS4200/
KX-TS4300 Intercom work at similar frequencies. Please 
contact Panasonic at 1-800-211-PANA (1-800-211-7262) 
for special wiring configurations.

You cannot page 
other extension.

L

The unit is in use. Try again later.

You cannot answer the 
transferred call even 
if the display shows 
“Transfer From 
xx

”.

L

The transferred call was disconnected before you 
answered it.

KXT4100_OI.book  Page 50  Friday, September 1, 2006  8:54 AM