Panasonic KX-TG1840AL 用户手册

下载
页码 76
Preparation
10
 
If you are satisfied with the operation of your telephone service after plugging in your 
Permitted Attachment, your installation is completed.
You will be unable to connect this Permitted Attachment if your telephone service consists 
only of a wall phone or an old style telephone which is not connected by means of a modern 
plug and socket. In such cases a new socket will need to be installed.
Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or 
unsuitable for operation with your telephone service. It should be returned to the store where 
purchased or to an Authorised Service Centre.
Service difficulties
If at any time a fault occurs on your telephone service carry out the following checks before 
you call for service:
L
Disconnect the Permitted Attachment and try using the service with the normal telephone.
L
If the telephone service then operates satisfactorily, the fault is in your Permitted 
Attachment. Leave the Permitted Attachment disconnected and report the fault to its 
supplier or agent to arrange for repair.
L
If when using the telephone the service is still faulty, report the fault to “Service Difficulties 
and Faults” for attention.
You are required to keep this Permitted Attachment in good working order while it is 
connected to your telephone service. Its construction or internal circuit must not be modified 
in any way without permission.
Warning:
This cordless telephone system does not incorporate provision for secrecy of conversations. 
Appropriately tuned radio equipment and other cordless telephone systems in close proximity 
may be used by a third party to monitor and possibly interrupt conversations in progress when 
this system is on radio operation.
TG1840AL(e-e).book  Page 10  Tuesday, April 11, 2006  11:02 AM