Panasonic KX-TES 用户手册
2. Setting Up Your Phone
DBS-32-755
Issued April 2000
33
Clearing Out a Name Assigned To a PSD Key
Note: You will need to know the PSD bin number for the key in order to clear
out an assigned name. To check the bin number for a key, see “Checking PSD
Numbers” on page 29.
out an assigned name. To check the bin number for a key, see “Checking PSD
Numbers” on page 29.
1. Pick up the handset or press ON/OFF.
2. Press PROG.
3. Dial #1.
4. Press AUTO.
5. Enter the PSD bin number for the key you want to clear (Example: 91, 903,
etc.).
6. Press AUTO as many times as necessary to clear out the name.
Note: It is strongly recommended that you assign the PSD bin number as
a name for the key at this point so that it will appear on the display for
future use. The bin number should be entered in the following format: “-
PSDxx (or xxx)” where xx or xxx = the actual bin number. Example: “-
PSD901”. Use the information in steps 7-10 under “Assigning Names to
PSD Numbers” on page 30 as a guide.
a name for the key at this point so that it will appear on the display for
future use. The bin number should be entered in the following format: “-
PSDxx (or xxx)” where xx or xxx = the actual bin number. Example: “-
PSD901”. Use the information in steps 7-10 under “Assigning Names to
PSD Numbers” on page 30 as a guide.
7. Press HOLD.
8. Press ON/OFF.
Note: If using a large-display phone, press MENU, then the key to the
left of PERSONAL DIAL to have the change reflected on the display.
left of PERSONAL DIAL to have the change reflected on the display.