Panasonic BB-GT1540 用户手册

69

When you finish talking, press 
{

INTERCOM}.

Note:
L

You can locate a misplaced handset 
by paging it.

Press {TALK} to answer the page.

When you finish talking, press 
{

OFF}.

Press {INTERCOM} to answer the 
page.

When you finish talking, press 
{

INTERCOM}.

Note for handset and base unit:
L

The ringer volume for intercom calls 
follows the higher volume level of the 
2 lines (page 51, 55).

L

When the ringer volume is set to off for 
both lines, the handset or base unit 
rings at a low level for intercom calls.

Answering an intercom call using 
auto intercom
Before using the auto intercom, turn auto 
intercom on (page 67).

When you are paged by the base 
unit, speak into the microphone.
L

To switch to the receiver, press 
{s}

.

To end the intercom, press {OFF}.

You can listen to the sound in a room 
where the handset is located using the 
auto intercom (page 67).
Important:
L

Before using this feature, set auto 
intercom on the destination handset to 
“On (Ringer Off)” to allow access 
by the base unit (page 67).

Call the destination handset (page 
68).
L

You can listen to the audio.

To mute your sound output, press 
{

MUTE} if necessary.

Press {INTERCOM} to stop 
monitoring.

Outside calls can be transferred 
between the handset and base unit. The 
handset and base unit can have a 
conference call with an outside party.

During an outside call, press 
{

INTERCOM} to put the call on hold.

To page the base unit, press {0}.

Wait for the paged party to answer.
L

If the paged party does not 
answer, press {TEL} or {IP} to 
return to the outside call.

To complete the transfer:
Press {OFF}.
L

The outside call is being routed to 
the base unit.

To make a conference call:
Press {CONF}.
L

To leave the conference, press 
{

OFF}. The other 2 parties can 

continue the conversation.

GT15xx.book  Page 69  Monday, June 4, 2007  8:52 AM