Clarity C4230 用户手册

43

Phone Will Not Hold Charge:
 

•  Make sure the charging contacts on the handset and base  

 

  are free of dust and dirt. While unplugged, clean the contacts  

 

  with a soft cloth.

 

•  Make sure CHARGE LED on the base is lit when the handset  

 

  is in the cradle.

 

•  Handset battery may have developed a memory, due to user  

 

  improperly charging, and may need to be replaced. (Battery  

 

  must be charged a full 12 hours before the first use.)

Difficulty in Placing or Receiving Calls:
 

•  Move closer to the base and try again.

 

•  Make sure you have selected the correct dialing mode, tone  

 

  or pulse.

 

•  Make sure the AC Adapter is not plugged into a wall outlet  

 

  with other appliances. Disconnect for 5-10 seconds then  

 

  reconnect. Place the handset back on the base and reinsert  

 

  the AC Adapter.

 

•  Make sure the handset battery is fully charged.

Your handset screen is showing Out of Range
 

•  Move closer to the base.

 

•  Place the handset into the base until the screen displays:  

 

  “Handset Registered.” It will take approximately 5-10  

 

  seconds for the handset to register to the base.

 

•  Handset may need to be re-registered to the base manually.  

 

  First, select INITIAL SETUP on the main menu. Second, select  

 

  REGISTRATION on the sub-menu. The screen will then display  

 

  “Please hold the page button until beep.” This will register your  

 

  handset to the base. The screen will then display the  

 

  handset number.