Verizon NSQ412 用户手册
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 45
or
Press the [SAVE] to confirm the setting.
The LCD will display:
The LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
play will return to the highest level of the
current setting.
Prime Line Preference
Programming
Programming
The Prime Line is the one that has the
highest priority to go off-hook when the
station is idle and you lift the handset,
press the [SPEAKER] or [HEADSET]
keys. To program the Prime Line
Preference, enter the programming mode
and turn the [JOG] knob until the display
shows PRIME LINE. The LCD will dis-
play:
highest priority to go off-hook when the
station is idle and you lift the handset,
press the [SPEAKER] or [HEADSET]
keys. To program the Prime Line
Preference, enter the programming mode
and turn the [JOG] knob until the display
shows PRIME LINE. The LCD will dis-
play:
Press the NAVIGATION [>] key to begin
to select the Prime Line. Rotate the
[JOG] knob to change the selection. For
example, the LCD will display:
to select the Prime Line. Rotate the
[JOG] knob to change the selection. For
example, the LCD will display:
•
•
Press the [SAVE] key to confirm the
selection. For example, the LCD will dis-
play:
selection. For example, the LCD will dis-
play:
After approximately five seconds, the dis-
play will return to the highest level of the
play will return to the highest level of the
current setting.
Line Group Programming
This setting allows lines 2, 3 and 4 to
have different telephone numbers for dif-
ferent stations (non-square). Stations
sharing the same telephone numbers on
a line need to be programmed as part of
the same group. To program the Line
Group, enter the programming mode and
turn the [JOG] knob until the display
shows LINE GROUP. The LCD will dis-
play:
have different telephone numbers for dif-
ferent stations (non-square). Stations
sharing the same telephone numbers on
a line need to be programmed as part of
the same group. To program the Line
Group, enter the programming mode and
turn the [JOG] knob until the display
shows LINE GROUP. The LCD will dis-
play:
Press the NAVIGATION [>] key to begin
programming the Line Group. Rotate the
[JOG] knob to change the CO Line. The
LCD will display:
programming the Line Group. Rotate the
[JOG] knob to change the CO Line. The
LCD will display:
•
•
L 3
U S A G E
= O f f
T u r n D i a l
S A V E : s a v e ?
T u r n D i a l
S A V E : s a v e ?
L 3
U S A G E
= O f f
P r o g r a m m e d !
P R I M E
L I N E
T u r n D i a l
> :
> :
e n t e r
L I N E
G R O U P
T u r n D i a l
> :
> :
e n t e r
L 2
G R O U P
T u r n D i a l
> :
> :
e n t e r
P R I M E
L I N E
= L 1
T u r n D i a l
S A V E : s a v e ?
T u r n D i a l
S A V E : s a v e ?
P R I M E
L I N E
= L 4
T u r n D i a l
S A V E : s a v e ?
T u r n D i a l
S A V E : s a v e ?
P R I M E
L I N E
= L 3
P r o g r a m m e d !