Ericsson 4187 Plus 用户手册
79
Dialog 4187 Plus
Settings
Programming the ring signal
By programming, you can adjust the ring character and ring
volume. To change the ring character and volume, you have to
enter the programming mode.
Programming the ring volume
You can choose between four settings for the ring volume: auto,
low, medium and high.
Note: The default setting is
AUTO
. The
AUTO
ringing
starts in a low volume, the third and fourth ring signal are in
a medium volume and the fifth and following signals are in
a high volume.
In idle mode:
²
Press.
¯
or
·
Select the
RINGER VOLUME
menu.
³
²
Press.
The display shows the current setting and a request to lift the
handset (in order to hear the sound).
The
A
in the lower right corner shows the current ringer volume
setting, the available settings are:
A
=Auto,
L
=Low,
M
=Medium and
H
=High
u
Lift the handset.
¯
or
·
Select
AUTO
,
LOW
,
MEDIUM
or
HIGH
.
The phone rings with the selected volume.
³
²
Press to save and exit.
d
Replace the handset.
RINGER VOLUME
FOR AUDIO LIFT HANDSET A
FOR AUDIO LIFT HANDSET A