Fujitsu F9600 用户手册

LinkPlus Interface Guide: Fujitsu F9600 Telephone System 

PN: 1725-36134-001_E.doc 

8 

“model” handsets then use the model as a template to program 
the other handsets. 

• 

All handsets are different

:  All handsets are programmed 

differently, so each handset will be programmed individually. 

Before installation, the parameters of the wired phones should be 
verified to plan the parameters required for the handsets. 

Directory number and equipment number 

The handset supports a total of nine line resources. Which lines 
should ring at this handset and which lines will be selected when the 
user goes off-hook? 

Station name 

What name is associated with this extension?  

Toll restrictions 

Should any special restrictions be assigned for incoming or outgoing 
calls?  

Programmable buttons 

Determine which features, if any, should be programmed on the 
SpectraLink Wireless Telephones. These assignments may emulate 
assignments on the users’ wired set. Use the key-map diagram for 
reference. 
If Autodial is to be used on the handsets, one of the programmable 
key sequences on the handsets must be used for Program Mode. 
If possible, identify a wired set that is programmed exactly or close to 
the way the handsets should be programmed. This set can be used to 
copy the programming to the new handsets. 

Assign Extension Numbers 

The wire contractor should inform the system administrator which 
port numbers have been designated for the handsets.