Avaya 4600 Series 用户手册

Introduction

2-1

2

2

This chapter describes the differences between data and voice networks, and the factors that 
influence the performance of VoIP. The installation and administration of 4600 Series IP 
Telephones on DEFINITY

®

 servers, and the installation and configuration of DHCP and TFTP are 

addressed.

2

The 4600 Series IP Telephones allow enterprises to use Voice over IP (that is, packet-switched 
networks) instead of telephony over the Public Switched Telephone Network (PSTN). However, 
the use of data networks for transmitting voice packets poses the problem that data networks were 
not designed for the specific qualities required by voice traffic.

2

Data and voice networks share similar functions due to the nature of networking.

■

Signaling is used to establish a connection between two endpoints.

In a voice network, signaling is used to identify who the calling party is trying to call and where 
the called party is on the network. Traditional telephony uses terminals with fixed addresses 
and establishes a fixed connection for the communication session between two such 
terminals, allocating fixed bandwidth resources for the duration of the call.

IP communications constitute a connectionless network, having neither fixed addresses nor 
fixed connections.

■

Addressing. Each terminal on a network must be identified by a unique address.

In a voice network the unique address is a permanent attribute, based on international and 
national numbering plans, as well as those based on local telephone company practices and 
internal customer-specific codes.

In IP communications, dial plans track extension numbers assigned to terminals. No fixed 
connection path is needed.