Avaya 5410 用户手册
2410 and 5410 User Guide
2410 and 5410 User Guide
Page 30
IP Office 3.2
[15-601076] Issue [4] (5 June 2006)
Longhand Programming
2. Press
Admin or
Admin 1. See Display Key Programming.
2. To switch to longhand programming mode, press Expl?
.
2. Press Next
until the required function required is shown, then press Selct
.
2. If the function requires some data to be entered, [ ] is shown at the bottom of the display. Enter
the data using the normal telephone keypad.
2. The upper part of the display reverts to showing the functions currently assigned to each
and
.
2. To move between the pages of display keys, press and .
2. To select the display key against which to program the new function, press
or
.
Caution
Do not select the slot used for the Admin function. Replacing this function will lock the phone for
further programming until reset through the telephone system.
2. If the display slot is not already used, the display shows BUTTON PROGRAMMED!.
To end programming, press
Exit.
To continue programming other functions, press
Cont.
9. If the display slot already has a programmed function, the display shows FEATURE ON
BUTTON. Press or until Repla, Keep and Delet are shown along the right-hand edge of the
display.
display.
Press Repla
to replace that existing function with the one just programmed. BUTTON
PROGRAMMED! is displayed.
To keep the existing function and forget the function just programmed, press Keep
.
To delete the existing function and forget the function just programmed, press Delete
.