Vidikron Vision 140 用户手册

There are several methods for mounting the projector. Depending on your chosen 
installation, one method may be more suitable than another. 

In typical front and rear screen installations, the projector can be mounted to a secure and 
level surface such as a table or cart. Carts are useful when moving a projector during a 
presentation or from site to site. If possible, lock the wheels when it’s in position to prevent it 
from being moved during a presentation.

For fixed installations, and for those that want the projector out of sight or have a limited 
space for projector and audience, you can invert the Vision 140/150 and suspend it from the 
ceiling using a specially-designed ceiling mount fixture. 

 

The projector can also be inverted and placed in an enclosure above and behind the viewing 
area. Install four feet on the inside bottom surface of the enclosure on which the projector 
can rest. A variety of materials can be used for this purpose (for example, rubber crutch tips 
or turntable feet). 

If the Vision 140/150 is ceiling-mounted and the screen is significantly lower than the 
projector, you can tilt the projector at an angle by adjusting the ceiling mount. 

The projector can be rotated (front-to-back) up to 360 degrees and mounted without it 
affecting performance. However, to ensure optimal performance of the lamp, limit the 
side-to-side tilt of the projector to ±15 degrees; see Figure 3-8. 

For a floor (non-AutoScope) installation, turn the two adjustable feet on the bottom of the 
projector to adjust the projection angle.

If you do either of these things, you may need to make keystone adjustments or vertically 
shift the image using the on-screen display (OSD) controls, to compensate. For detailed 
instructions, refer to Using the On-Screen Menus on page 63.

± 360º

± 15º