Sony KF-60XBR800 用户手册
Other Information
88
No color
❏
Adjust the
Color
settings in the Video menu (see page 67).
Only snow and noise
appear on the screen
appear on the screen
❏
Check the Cable setting in the Channel menu (see “
❏
Check the antenna/cable connections.
❏
Make sure the channel is broadcasting programs.
❏
Press
ANT
to change the input mode (see page 47).
Dotted lines
or stripes
or stripes
❏
Adjust the antenna.
❏
Move the LCD projection TV away from noise sources such as cars, neon signs, or
hair-dryers.
hair-dryers.
LCD projection TV is fixed to
one channel
one channel
❏
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in TV memory (see page 73).
❏
Check your Channel Fix settings (see page 73).
Double images, ghosts, or
merged colors
merged colors
❏
Use a highly directional outdoor antenna or a cable (when the problem is caused by
reflections from nearby mountains or tall buildings).
reflections from nearby mountains or tall buildings).
❏
Set the Image Revision to an appropriate value. The default setting is Auto. If
ghosts, doubled images, or merged colors appear with Auto, select the best value
from 0 to 3 (see page 81).
ghosts, doubled images, or merged colors appear with Auto, select the best value
from 0 to 3 (see page 81).
Cannot operate menu
❏
If the item you want to choose appears in gray, you cannot select it.
❏
Turn the LCD projection TV’s power off and on again.
Cannot receive any channels
when using cable TV
when using cable TV
❏
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in TV memory (see page 73).
❏
Check your cable settings.
❏
Make sure
Cable
is set to
ON
in the Channel menu (see page 73).
Cannot gain enough volume
when using a cable box
when using a cable box
❏
Increase the volume of the cable box using the cable box’s remote control. Then
press
press
FUNCTION
until the TV indicator lights up and adjust the LCD projection
TV’s volume.
Channel Index does not display
all available channels
all available channels
❏
Make sure Cable is set to
ON
in the Channel menu (see “
❏
Use
Auto Program
in the Channel menu to add receivable TV channels that are
not presently in TV memory (see page 73).
Cannot receive channels
Unable to select a channel
❏
Use
Auto Program
in the Channel menu to add receivable TV channels that are
not presently in TV memory (see page 73).
Lost password
❏
In the password screen (see page 75), enter the following master password: 4357.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
Cannot change channels with
the remote control
the remote control
❏
Be sure you have not inadvertently switched your LCD projection TV from
channel 3 or 4 setting if you are using another device to change channels.
channel 3 or 4 setting if you are using another device to change channels.
❏
If you are using another device to control channels, be sure the “function” button
for that device has been pressed, or the slide switch is set correctly. For example, if
you are using your cable to control channels, be sure to press
for that device has been pressed, or the slide switch is set correctly. For example, if
you are using your cable to control channels, be sure to press
SAT/CABLE
.
Cannot cycle through the other
video equipment connected to
the LCD projection TV
video equipment connected to
the LCD projection TV
❏
Be sure the
Video Label
feature has not been set to
Skip
Problem
Possible Remedies