Clarity WN=5230-S 用户手册

 

 

WN-5230-S VideoWall User’s Guide 

 

 

59 

The Big Picture Option Key enables the functions and features 
associated with Clarity’s Big Picture™. The Option Key consists of an 
integrated printed circuit board assembly and a cable harness. Included 
as part of the Printed Circuit Board Assembly are two adhesive-backed, 
nylon, PC board mounts. To install it, follow these steps. 

If the display is on, turn it off with the remote control (or 
by pressing the button on the rear panel). Wait for the 
fans to stop (30 seconds). Turn off the power with the 
switch at the power supply input and remove the power 
cord. 

Remove the rear access cover.  

Plug the connector of the Big Picture Option Key into the 
2x7 connector on the Electronics Module. 

Remove the protective backing from the PCB mounts. 
Apply the mounts and board assembly to floor of the 
chassis to the left of the electronics module. 

Connect the power cord and start the display as usual. 
Note: The Big Picture Option Key can be installed 
without turning off the power. However, the Electronics 
Module must be re-started from a no-power state to 
recognize the presence of the key.