Epson LS57P2 用户手册

Off

Green

Ready

The TV is operating normally.

Off

Green flashing

Warm-up mode

After a moment, your image will appear.

Off

Orange flashing

Cool-down mode

Wait until the 

Power

 light stops flashing. When it lights orange 

without flashing, you can turn the TV back on or unplug it.

Off

Orange

Standby mode

To turn the TV back on, press the 

Power

 button. If you need to 

disconnect the power, you can unplug the TV.

Orange flashing

Any state

Lamp replacement warning

The projection lamp is almost burned out. You may also see a 
message on the screen.

Obtain a replacement lamp, then follow the steps on page 97 
to replace it.

Red

Red

Lamp error

The projection lamp has burned out or has another problem. 
Obtain a replacement lamp, then follow the steps on page 97 
to replace it.

Red flashing

Red

Lamp cooling or open cover error

Make sure the lamp cover is closed completely. 

If the cover is closed, the lamp may not have cooled 
completely before the cover was opened. Wait a few minutes 
until the fan stops running, then unplug the TV, plug it back in, 
and press the 

Power

 button to turn on the TV. If the error 

persists, contact Epson as described on page 121.

Orange

Red

High temperature warning

The TV is overheating and the lamp is turned off automatically. 
Turn off the TV and let it cool for a few minutes. Make sure there 
is plenty of space around the TV and that none of the 
ventilation slots are obstructed. Then turn the TV back on. If it 
continues to overheat, contact Epson as described on 
page 121.

Power 
light

Lamp 
light