Epson LS57P2 用户手册

The projection lamp in your TV is designed to last approximately 10,000 hours. Lamp life 
will vary depending on the mode selected, environmental conditions, and usage.

When it is time to replace the lamp, the TV displays a message on the screen.

The Lamp and Power lights on the front of the TV also indicate the status of the lamp.

You can purchase replacement lamp number V13H010R02 from your dealer or Epson. Call 
(800) 873-7766 or visit the Epson Store at www.epsonstore.com (U.S. sales only). In Canada, 
please call (800) 463-7766 for dealer referral

Don’t replace the lamp unless you see a screen message or the Lamp and Power lights 
indicate lamp replacement, as described in the table below:

Orange flashing

Any state

Lamp replacement warning

The projection lamp is almost burned out. You may also see a 
message on the screen.

Obtain a replacement lamp, then follow the steps on page 98 
to replace it.

Red

Red

Lamp error

The projection lamp has burned out or has another problem. 
Obtain a replacement lamp, then follow the steps on page 98 
to replace it.

Red flashing

Red

Lamp cooling or open cover error

Make sure the lamp cover is closed completely. See the steps 
for accessing the cover on page 98.

If the cover is closed, the lamp may not have cooled 
completely before the cover was opened. Wait a few minutes 
until the fan stops running, then unplug the TV, plug it back in, 
and press the 

Power

 button to turn on the TV. If the error 

persists, contact Epson as described on page 121.

If your picture quality is not 
what it should be, try the 
other solutions described in 
“Picture Problems” on 
page 112 to correct it. If 
none of them work, you 
may need to replace the 
lamp. However, contact 
Epson (see page 121) to 
see if lamp replacement 
would help before 
replacing the lamp 
unnecessarily.

Turn off the TV when not in 
use. Continuous 24-hour-a-
day use may reduce its 
overall life.

Power 
light

Lamp 
light