HP (Hewlett-Packard) 7570e 用户手册

In the event that you must perform a recovery, HP Disaster Recovery will 
require that you partition your new drive(s) to the same settings as were 
set before the drive failure. In order to do this, it may be helpful to make 
a record of your current partition settings on paper and keep an updated 
record of these settings with each DR Set. 

What is a partition? A partition is a logical section of your hard 
disk. One physical hard disk may be partitioned into two or more 
logical hard-drives.

1. Double-click the My Computer icon located on your desktop. 

The My Computer Window appears.

2. Select Details from the View menu.

A list of drive types will appear under the Type heading, to the right of 
your drive letter. 

3. Under the Name heading, right-click on the drive letter listed as a Local 

Disk, then select Properties.

The selected drive’s Properties dialog box appears.

4. Write down the information displayed in the Type dialog.

5. Write down the information displayed in the Capacity dialog.

6. Repeat steps 3-5 for each Local Disk on your computer.

After you have created the DR Set, you will be asked if you would like to 
test the DR Set. Testing the DR Set is very similar to performing an actual 
recovery; however, be sure to stop testing when instructed to do so. This 
test is to verify that your drive is responding properly.

1. Follow steps 1 through 8 in the Windows 95 and Windows 98 section of 

“Recovering Your Data.”