Hand Held Products 7900 Series 用户手册

802.11b Settings always opens to the Status tab, which displays the current WLAN settings for 802.11b. 

Shows the RF channel currently used by the radio.

Shows the current transmit rate. This can be 1 Mbps, 2 Mbps, 5.5 Mbps, or 11 Mbps.

Tap this button to disable/enable the radio.

Tap this button to start a rescan process to search for an AP with a stronger signal in the network.

Displays the signal to noise ratio.

Displays the signal strength at the receiver.

Displays the IP address of the radio. Verify configuration information with your network administrator. 

Tap this button to reapply the IP address from the DHCP server when automatic DHCP is enabled.

Displays the Network Name and the MAC address of the: 

•             Access point the radio is associated with in AP mode, or
•             Creator of IBSS into which the radio is joined in peer-to-peer (Ad-Hoc) mode.

After an SSID is chosen, this field name changes to “IBSS ID.”