Polycom DOC2702A 用户手册
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
21-34
Polycom, Inc.
9
Click the Traps tab.
The RMX-SNMP Properties – Traps dialog box opens.
The RMX-SNMP Properties – Traps dialog box opens.
Traps are messages sent by the MCU to the SNMP Managers when events such as MCU
Startup or Shutdown occur. Traps may be sent to several SNMP Managers whose IP
addresses are specified in the Trap Destinations box.
10
Define the following parameters:
Versions 1 & 2
Version 3
Table 21-2
SNMPv3 - Traps
Field
Description
SNMP Trap Version
Specifies the version, either Version 1 2 or 3 of the traps being sent to
the IP Host. Polycom software supports the standard SNMP version 1
and 2 traps, which are taken from RFC 1215, convention for defining
traps for use with SNMP.
Note: The SNMP Trap Version parameters must be defined
identically in the external SNMP application.
the IP Host. Polycom software supports the standard SNMP version 1
and 2 traps, which are taken from RFC 1215, convention for defining
traps for use with SNMP.
Note: The SNMP Trap Version parameters must be defined
identically in the external SNMP application.