Raritan Computer 255-30-6000-00 用户手册
Network Settings
108
Network Settings
To configure Paragon IIʹs network settings from the OSUI, select option 7,
Network Settings, from the Administration Menu.
Network Settings, from the Administration Menu.
• Current IP: This field allows administrators to configure the Paragon
IIʹs address on the network. Use the arrow keys to scroll over to each
byte and change the IP as needed. The default IP address is
192.168.0.192.
byte and change the IP as needed. The default IP address is
192.168.0.192.
• Net Mask: The net mask for the Paragon switch is set at a default
value of 255.255.255.0. Reset this as necessary.
• Gateway IP: This default is set to 192.168.0.1. Reconfigure as needed.
• Port No: Default is 3000.
• Encryption: If you enable Encryption for the network port,
• Port No: Default is 3000.
• Encryption: If you enable Encryption for the network port,
communications between the Paragon switch and Paragon Manager
clients run from a PC are encrypted with a 128‐bit key. Default setting
is Off.
clients run from a PC are encrypted with a 128‐bit key. Default setting
is Off.
Note: The Ethernet port on the Paragon II is hard coded (not
configurable) and supports only 10‐BaseT/Half duplex.
configurable) and supports only 10‐BaseT/Half duplex.