Raritan Computer 255-30-6000-00 用户手册
User Profile Customization
64
• Global Scan Rate: If Scan Mode is set to “Global,” this parameter
determines the length of time that the system pauses at each channel
port while scanning. Using leading zeroes if necessary, type in a
two‐digit number of seconds from 01 to 24, or use the Ï and Ð keys
to increase and decrease the current value by 1 respectively. The
default setting is 03.
port while scanning. Using leading zeroes if necessary, type in a
two‐digit number of seconds from 01 to 24, or use the Ï and Ð keys
to increase and decrease the current value by 1 respectively. The
default setting is 03.
• ID Display: The ID Display is a small window that can appear
onscreen to display the name and ID of each channel port as you
switch between them or scan them. Edit the two fields to determine
how the system will show you this window:
switch between them or scan them. Edit the two fields to determine
how the system will show you this window:
Possible values in the first field are “On” (ID Display is shown,
the default value) and “Off” (ID Display isn’t shown). Use any of
the arrow keys to toggle between these values.
the arrow keys to toggle between these values.
If the ID Display is set to “On,” the number in the second field,
Seconds, indicates how many seconds it will remain onscreen.
Using leading zeroes if necessary, type a two‐digit number of
seconds from 01 to 24, or use the Ï and Ð keys to increase and
decrease the current value by 1 respectively. If you type a
number greater than 24, the second field will be filled with a “‐ ‐”,
indicating that the ID Display will be shown at all times. The
default setting is 03. If the ID Display is set to “Off,” the number
in this field will have no effect.
Using leading zeroes if necessary, type a two‐digit number of
seconds from 01 to 24, or use the Ï and Ð keys to increase and
decrease the current value by 1 respectively. If you type a
number greater than 24, the second field will be filled with a “‐ ‐”,
indicating that the ID Display will be shown at all times. The
default setting is 03. If the ID Display is set to “Off,” the number
in this field will have no effect.
• Sleep Mode: A power‐saving mode that is activated once a user logs
in. Sleep mode acts as a screensaver if the user station is idle (no
keyboard or mouse activity) for a specified amount of time. Sleep
mode is user‐specific; whatever mode a user sets applies to only that
user once logged in. Edit this field and the Minutes field that follows
to determine how the system handles sleep mode. Possible values are
Saver, Green, and Off. Use the Ï and Ð keys to toggle between these
values.
keyboard or mouse activity) for a specified amount of time. Sleep
mode is user‐specific; whatever mode a user sets applies to only that
user once logged in. Edit this field and the Minutes field that follows
to determine how the system handles sleep mode. Possible values are
Saver, Green, and Off. Use the Ï and Ð keys to toggle between these
values.
Saver: The OSUI, with or without background, is a “floater” and
appears regularly in random locations on the screen.
Green: The monitor goes blank.
Off: Sleep Mode is disabled and the screen displays normal video
indefinitely.
If Sleep Mode is set to Saver or Green, in the Minutes field, type
the number of minutes of inactivity before Sleep Mode is
triggered. Using leading zeroes if necessary, type a two‐digit
number of minutes from 01 to 99, or use the Ï and Ð keys to
increase and decrease the current value by 1 respectively. The
default setting is 05. If Sleep Mode is set to “Off,” the number in
this field will have no effect.
triggered. Using leading zeroes if necessary, type a two‐digit
number of minutes from 01 to 99, or use the Ï and Ð keys to
increase and decrease the current value by 1 respectively. The
default setting is 05. If Sleep Mode is set to “Off,” the number in
this field will have no effect.