Raritan Computer 255-30-6000-00 用户手册
Selecting a Server
52
The identification of blocked channels is fully supported whether in a
single‐base or multiple‐base regular Paragon configuration with some
limitations as below.
single‐base or multiple‐base regular Paragon configuration with some
limitations as below.
• Blocked channel/switch identification only functions within a regular
Paragon configuration (no diamond connection and triangle
connection inside). There is no guarantee that it will function
correctly in the diamond or triangle configuration (For additional
information about these two configurations, see Non‐Standard Tiered
Configurations (on page 143)). However, from userʹs perspective, the
user behavior on the light blue channel (the blocked one) is the same
as that on the green channel (the active and unoccupied one).
connection inside). There is no guarantee that it will function
correctly in the diamond or triangle configuration (For additional
information about these two configurations, see Non‐Standard Tiered
Configurations (on page 143)). However, from userʹs perspective, the
user behavior on the light blue channel (the blocked one) is the same
as that on the green channel (the active and unoccupied one).
• Blocked channel/switch identification are only activated in the
Private mode. This feature will be disabled when in PC Share or
P‐View modes.
P‐View modes.
Manually Selecting the Access Path
When all tiered devices in the Paragon II system are implemented with
firmware version later than 3E3, you can manually choose a path to
access a target server in the channel number view. For older Paragon I or
Paragon II products to support this feature, see the note in the end of this
section for more information.
firmware version later than 3E3, you can manually choose a path to
access a target server in the channel number view. For older Paragon I or
Paragon II products to support this feature, see the note in the end of this
section for more information.
1. Make sure you are in the channel number view in the Selection Menu.
If not, press F12 to toggle the view.
2. Press the Ï and Ð keys to highlight one of the channels in purple
(available paths) or yellow (in PC share mode) which are connected
to a tiered device (a tiered device is indicated with the symbol “‐ ‐”
displayed in the Scn field).
to a tiered device (a tiered device is indicated with the symbol “‐ ‐”
displayed in the Scn field).