Multiquip V304 用户手册

■ High Temperatures – Always stop engine and allow the

engine to cool before adding fuel, oil or performing service
and maintenance functions. Contact with 

hot components can

cause serious burns.

■ NEVER

  engage the "

free wheel engagement lever" when

parked on an incline.

■ NEVER

  disconnect any 

"emergency or safety devices".

These devices are intended for operator safety. Disconnection
of these devices can cause severe injury, bodily harm or even
death! Disconnection of any of these devices will void all
warranties.

■

ALWAYS 

know the location of the nearest 

and 

first aid kit. Know the location of the nearest telephone.

Also know the phone numbers of the nearest 

ambulance,

doctor and fire department.  This information will be
invaluable in the case of an emergency.

■ NEVER lubricate components or attempt service on a running

machine.

■

ALWAYS 

 allow the machine a proper amount of time to cool

before servicing.

■ Keep the machinery in proper running condition.
■ Fix damage to the machine immediately and always replace

broken parts.

■ Dispose of hazardous waste properly. Examples of potentially

hazardous waste are used motor oil, fuel and fuel filters.

■ DO NOT use food or plastic containers to dispose of

hazardous waste.

■ DO NOT pour waste, oil or fuel directly onto the ground,

down a drain or into any water source.

■ The roller has an operating weight of approximately 1,045

lbs. (474 Kg). Use lifting equipment capable of lifting this
weight.

■ ALWAYS check the roller's transport hooks. Make sure the

hooks are secure and tight before lifting the machine.

■ NEVER

  Run engine without air cleaner. Severe engine

damage may occur.

■

ALWAYS  read, understand, and follow procedures in
Operator’s Manual before attempting to operate equipment.

■

ALWAYS be sure the operator is familiar with proper safety
precautions and operations techniques before using pump.

■

ALWAYS  store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.

■

DO NOT  operate this roller with hydrostatic oil temperature
higher than 180 degrees Fahrenheit.

■

NEVER  leave the roller unattended, turn off engine and place
lock handle in upright position.

■

CAUTION  must always be observed while servicing this roller.
Rotating parts can cause injury if contacted.

■

DO NOT  leave roller with engine running. Use chock blocks
if parking roller on a grade.

■ NEVER ride on a walk-behind roller in unshored trenches or

near steep, unsupported banks. The  vibration caused by the
roller could cause a cave-in.

■ ALWAYS use extreme care when walking behind the roller,

avoid having your feet or clothing getting caught under the
dolly wheels or roller.

■ Whenever possible try and stand to one side of the roller

rather than directly behind it.

■ ALWAYS use extreme care when operating near obstructions,

on slippery surfaces, grades and side slopes.

■ ALWAYS  wear slip resistant safety shoes or boots.
■ Unauthorized equipment modifications will void all

warranties.

■ Uneven grades can cause the handle to raise or lower

unexpectedly, striking the operator by surprise.

■ When working on slopes, avoid sidehill travel whenever

possible. Operate up and down travel only. Remember, the
danger  of sliding on and/or tripping on steep slopes is always
present

■ NEVER ride on a walk-behind roller unless it is designed to

accommodate riders and an appropriate seat is provided.

■

Refer to the 

Engine Owner's Manual for engine technical

questions or information.