Motorola LS4208 用户手册

Symbologies 12 - 47

To enable or disable Codabar, scan the appropriate bar code below.

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) 
the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within a specific 
range.

One Discrete Length - Select this option to decode only Codabar symbols containing a selected length. 
Select the length using the numeric bar codes in 

. For example, to decode 

only Codabar symbols with 14 characters, scan Codabar - One Discrete Length, then scan 1 followed by 4. 
To correct an error or to change the selection, scan Cancel on 

Two Discrete Lengths - Select this option to decode only Codabar symbols containing either of two 
selected lengths. Select lengths using the numeric bar codes in 

. For 

example, to decode only Codabar symbols containing either 2 or 14 characters, select Codabar - Two 
Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan 
Cancel on 

Length Within Range - Select this option to decode a Codabar symbol with a specific length range. 
Select lengths using numeric bar codes in 

For example, to decode 

Codabar symbols containing between 4 and 12 characters, first scan Codabar - Length Within Range. 
Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an 
error or change the selection, scan Cancel on 

Any Length - Scan this option to decode Codabar symbols containing any number of characters within the 
scanner capability.