Runco Q-1500d Ultra/Cinewide with Auroscope 用户手册
Q-1500d Series Installation/Operation Manual
37
PRE
L
IMINAR
Y
3.6
Mounting the DHD
Controllers and
Brightness
Acceleration Engine
Mounting the DHD
Controllers and
Brightness
Acceleration Engine
The DHD Controller units and Brightness Acceleration Engine can be placed on any flat,
stable surface such as a shelf or table, or they can be rack-mounted using the supplied
mounting hardware. Place these components in a location that provides easy access to
the power connectors.
stable surface such as a shelf or table, or they can be rack-mounted using the supplied
mounting hardware. Place these components in a location that provides easy access to
the power connectors.
The DHD Controller units and Brightness Acceleration
Engine each require 2U (3.5 inches) or more of vertical
rack space (at least 10.5 inches total). To minimize
cable clutter, Runco recommends that you install the
Brightness Acceleration Engine between the Primary
and Secondary DHD Controllers in the rack.
Engine each require 2U (3.5 inches) or more of vertical
rack space (at least 10.5 inches total). To minimize
cable clutter, Runco recommends that you install the
Brightness Acceleration Engine between the Primary
and Secondary DHD Controllers in the rack.
To mount the DHD Controllers and Brightness Acceleration Engine in a standard, 19-inch
equipment rack, install the mounting ears on either side of the chassis using the supplied
screws; see Figure 3-11. Then, secure the mounting ears to the rack.
equipment rack, install the mounting ears on either side of the chassis using the supplied
screws; see Figure 3-11. Then, secure the mounting ears to the rack.
Figure 3-11. Attaching the Rack Mounting Hardware
Primary DHD Controller
Brightness Acceleration Engine
Secondary DHD Controller