Runco Q-1500d Ultra/Cinewide 用户手册
10
Q-1500d Series Installation/Operation Manual
PRE
L
IMINAR
Y
Projector Rear Panel
Figure 2-3 shows the Q-1500d rear panel.
Figure 2-3. Q-1500d Rear Panel
1.
POWER INPUT (Primary Engine – 100 to 240 VAC)
Connect the primary optical engine to power here.
Connect the primary optical engine to power here.
2.
DHD INPUT (Primary Engine)
An HDCP-compliant digital video input for connecting the HDMI Out (To Display)
from the Primary DHD Controller.
An HDCP-compliant digital video input for connecting the HDMI Out (To Display)
from the Primary DHD Controller.
3.
RS-232C INPUT (Primary Engine) (9-pin, female D-Sub)
Connect the Display Control output on the Primary DHD Controller to this input (see
Figure 2-5).
Connect the Display Control output on the Primary DHD Controller to this input (see
Figure 2-5).
4.
STANDBY LED (Primary Engine)
Indicates primary engine status as follows:
Indicates primary engine status as follows:
• Solid green = AC power present, ready to turn on.
• Flashing green = Projector is initializing; keypad functions not allowed.
• Off = Normal operation.
➤
PRIMARY
PRIMARY
SECONDARY
SECONDARY
6
7
8
11
10
9
1
2
3
4
5