Runco Q-1500d Ultra/Cinewide 用户手册
Q-1500d Series Installation/Operation Manual
81
PRE
L
IMINAR
Y
select a color gamut (range) that may be different from the default color gamut.
Each setting defines the precise hue of each primary (red, green and blue) and
secondary (yellow, cyan and magenta) color component used to generate the millions
of colors produced in displays. Changing this setting relocates the “triangle” for
possible colors (see Figure 4-7). For example, changing the x/y coordinates for red
moves the color closer to either orange or violet, which in turn affects all displayed
colors having a red component.
secondary (yellow, cyan and magenta) color component used to generate the millions
of colors produced in displays. Changing this setting relocates the “triangle” for
possible colors (see Figure 4-7). For example, changing the x/y coordinates for red
moves the color closer to either orange or violet, which in turn affects all displayed
colors having a red component.
• Auto automatically chooses the appropriate color gamut:
• SMPTE C for NTSC, 480i and 480p sources.
• EBU for PAL, SECAM, 576i and 576p sources.
• REC709 for all other sources.
• Select REC709 to use the color gamut defined in ITU-R BT.709-5.
• Select SMPTE-C to use the color gamut defined in SMPTE 170M-1999.
• Select EBU to use the color gamut defined in EBU Tech. 3213-E.
• Select Native for Runco's recommended Personal Color Equalizer preset for typical
video sources. It displays the fully saturated LED color gamut with appropriate color
brightness, hue, and Runco Smart Color settings.
brightness, hue, and Runco Smart Color settings.
• Select PCE to use the Personal Color Equalizer feature of the Q-1500d. PCE lets you
define a custom color gamut. Refer to the next section, PCE, for instructions on how to
do this.
do this.
Table 4-3 lists the Color Gamut settings and associated x- and y-coordinates for each
primary and secondary color component.
primary and secondary color component.
• PCE: To use the Personal Color Equalizer to define a custom color gamut, choose the
“PCE” Color Gamut setting (refer to Color Gamut on page 81). Then, choose PCE
from the Display Color - Common Settings menu and press ENTER.
from the Display Color - Common Settings menu and press ENTER.
The DHD Controller uses the Color Gamut settings for all display
modes on a given input.
modes on a given input.
Table 4-3. x/y Color Gamut Values
Primary
Color
Color Gamut Settings and Associated x/y Values
REC709
SMPTE “C”
EBU
x
y
x
y
x
y
Red
0.640
0.330
0.635
0.340
0.640
0.330
Yellow
0.419
0.505
0.421
0.506
0.418
0.502
Green
0.300
0.600
0.305
0.595
0.290
0.600
Cyan
0.225
0.329
0.228
0.326
0.220
0.329
Blue
0.150
0.060
0.155
0.070
0.150
0.060
Magenta
0.321
0.154
0.318
0.162
0.328
0.158
Note