Runco VX-3000D 用户手册
VX-3000d Series Installation/Operation Manual
25
PRE
L
IMINAR
Y
5.
Remove the rear cap from the lens.
This protective cap is only used during
shipping to protect the lens from
damage.
This protective cap is only used during
shipping to protect the lens from
damage.
6.
Carefully cut and remove the plastic band
around the lens motor connector wires.
Take great care not to cut the wires!
around the lens motor connector wires.
Take great care not to cut the wires!
7.
Detach the lens motor connector from the
motor by removing the two screws holding it
in place.
motor by removing the two screws holding it
in place.
8.
Note that the lens mount flange has a female
socket connector for the lens motor on the
right side of the flange.
socket connector for the lens motor on the
right side of the flange.
REMOVE
REMOVE
Lens Motor
Connector
Connector