Runco Q-1500D 用户手册

Q-1500d Series Installation/Operation Manual

123

PRE

IMINAR

7.1
Q-1500d Projector
Specifications

Table 7-3 lists the Q-1500d projector specifications.

7. Specifications

Table 7-1. Q-1500d Projector Specifications

Projector Type:

Texas Instruments Digital Light Processing™ (DLP) dual
imaging system, SuperOnyx™ DMD™

Native Resolution:

Full HD 1920 x 1080 (1080p)

Aspect Ratios:

4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native

DTV Compatibility:

Refer to Table 7-2

Picture Size (16:9 Screen):

Recommended Width: 72- 132 in.
Maximum Width: 200 in.

Processing:

Runco DHD4 Processor with ViVix IV™ technology and BRiC
(Backup, Recovery and Clone) tool

Control Options:

• Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via

HDMI

• Ethernet

Inputs:

Refer to Table 7-3

12V Output (for anamorphic
lens transport):

+12 VDC, rated at 250 mA

Video Standards:

NTSC, PAL, SECAM, CEA-861D

Calibration:

ISF Certified Calibration Configuration

Color Gamut:

Fully adjustable, > BT.709 (REC709)

Throw Distance
(Factor x Screen Width):

Horizontal & Vertical Offset:

Refer to Table 3-4

Light Output:

CSMS Specifications* – Home Theater Calibration:
900 ANSI Lumens; 58 Foot-Lamberts (fL)
Uncalibrated: 1400 ANSI Lumens

Light output will drop less than 10% over the life of the
product.

*Measured on a 1.3 gain, 72" wide 16:9 screen

Contrast Ratio:

CSMS* Contrast Ratio: 330:1
3 settings: Infinity:1, 20,000:1, and 10,000:1 (sequential)
ColorContrast™ for up to 50% higher contrast by color

Illumination System:

InfiniLight™ LED (RGB) illumination system