Runco VX-8D 用户手册

Figure 3-6 shows the VX-8d/CineWide with AutoScope motor assembly. 

Remove Projector Front Feet: Place the projector upside down on a blanket or other 
soft surface. Loosen and remove the two front feet on the projector. 

Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, the 
adapters bring the attachment points for the projector mounting rails (included with the 
projector ceiling mount kit) from the bottom of the projector up and around the AutoScope 
lens motor housing. For floor installations (where the projector is upright), the adapters 
allow the projector to lie flat on the mounting surface.

Using eight (8) each of the supplied, Pan-Head Phillips screws, attach the AutoScope 
Ceiling Mount Adapters/Projector Stands to the projector as shown in Figure 3-7. 

➤

3

1

AutoScope

Lens Motor

Screw, Phillips Pan-Head,

10-32 x 3/8” (12x)

2

CineWide with AutoScope
Ceiling Mount Adapter/
Projector Stand, Right

4 CineWide with

AutoScope Ceiling 
Mount Adapter/
Projector Stand, Left