Cobra Electronics PR240 用户手册

Customer

Assistance

Warranty

Introduction

comes close to a Cobr

a

™

1.

While in 

Standby Mode, pr

ess the 

or Channel

button to choose the main

channel you wish to scan.

2. Press the 

Mode button until the Scan icon and

the privacy code number flashes on the display.

3. Press the 

or Channel

button

and your radio will begin scanning privacy
codes within the main channel you selected.

4. The Scan icon will continue to be displayed

when Scan is On. Your radio will continue 
to scan privacy codes and stop an incoming
transmission is detected. Your radio will remain
on that channel and privacy code for ten (10)
seconds. During this time, you can:

a. Press and hold the 

button to

communicate with others. Your radio 
will remain on that channel and privacy
code and return to 

Standby Mode.

b. Press the 

or Channel

button to r

esume scanning privacy codes.

c. Press the 

Mode button to pr

oceed to 

other functions.

If you press the 

button while scanning, 

and not within ten (10) seconds of receiving 
a transmission, you will transmit on the last
channel you transmitted or received on.
If you do not press any button within ten (10)
seconds, your radio will automatically resume
scanning privacy codes. 

Y

ou can choose between ten (10) different call 

tone settings to transmit a unique call alert. 

1.

Press the 

Mode button until the letter “C” 

and the current call tone number (1 through
10) is displayed. The current call tone will
sound for one (1) second.

2. Press the 

or Channel

button to hear the other call tone settings.

3. a. Press the 

Mode button to enter the new

setting and proceed to other functions.

b. Press the 

Lock button to enter the new

setting and return to 

Standby Mode.

Y

our listener will hear an audible tone when you

release the 

button. This aler

ts the other party

that you are finished talking and it is 

OK for them

to speak. This feature can be turned On or Off.

When tur

ning On your microTALK

®

radio

for the first time, “Roger Beep” will be On.
1. Press the 

Mode button until the Roger 

Beep icon flashes. The current On or 
Off setting is displayed.

2. Press the 

or Channel

button to select “Roger Beep” On or Of

f.

3. a. Press the 

Mode button to enter the new

setting and proceed to other functions.

b. Press the 

Lock button to enter the new

setting and return to 

Standby Mode.

The setting you select will be saved when you 
turn your radio Off and On again. When the
“Roger Beep” is On, the “Roger Beep” icon 
will be displayed.