Winegard MODELS RS-3000 用户手册

RoadStar Antenna

RoadStar Antenna

1

2

Do not attempt to install this system in 
the rain or under any wet conditions. 

Do not paint this antenna. Painting 
the antenna will void your warranty.

Range of up to 35 miles* 

For VHF 

& UHF channels

For outdoor use only

Amplified

Height: 7.6”

Diameter of Antenna Head: 14.9”

Power required: 12 VDC at 85 mA

Models RS-3000 (white), RS-3035 (black)

Models RP-RS30 (white) replacement 
head and RP-RS35 (black) 
replacement head are available.

*Antenna reception may vary 
based on transmitting antenna 
tower height, lobe pattern of the 
transmitter, height of the receiving 
antenna, weather conditions, and 
terrain on receiving path, including 
trees, buildings and hills.

Before mounting the antenna, 
determine a location for the wall 
plate/power supply. 

Keep in mind the following:

A coaxial cable will have to run 
from the the power supply to the 
antenna and from the power supply 
to each television. 

A 12 V connection must be made to 
the back of the power supply.

Refer to the diagram on page 7 for 
more information on connecting to 
the power supply.

Then, choose a location for the 
antenna that meets the following 
requirements:

Offers enough support for a secure 
installation

Maintains adequate clearance 
from the edge of the roof and any 
obstructions

•  clearance distance of 24 in. 

needed from center of antenna to 
front of the vehicle

•  clearance distance of 18 in. 

needed from center of antenna 
to nearest obstruction and to the 
edge of the roof

For cable entry directly beneath the 
antenna, follow the steps on page 3 
under “Mounting Option 1.”

For cable entry via a cable entry plate 
(sold separately), follow the steps on 
page 5 under “Mounting Option 2. “