LOEWE Individual 55 Compose 3d 用户手册

下载
页码 158
- 114
english
 Devices to the  HDMI connections
The HDMI connections (High Definition Multimedia Interface) allow the 
transmission of digital video and audio signals from a player (e.g.  DVD 
player,  DVD recorder,  Blu-ray player,  game console or  Set-Top-Box) via 
a single cable.
The digital video and audio data are transmitted without data compres-
sion digitally and therefore lose none of their quality. 
A maximum of five devices can be connected in cascade to every HDMI 
socket. The devices are arranged in the AV menu and in the station list 
below the appropriate HDMI socket. If the respective device sends its own 
device name, this appears in place of the connection name.
Your TV set can show 24p films, which are output from a connected 
HDMI player (e.g. Loewe BluTech Vision Interactive) optimally (see glos-
sary, page  147). 
Digital video signals from a DVI player can be also be reproduced by the 
HDMI connection using a  DVI/HDMI adapter cable. The sound must be 
piped in additionally. However, the sound must then be supplied additionally.
HDMI and DVI both use the same copy protection method HDCP.
Connecting the device
Switch off all equipment before connecting.
Connect the device by an HDMI cable (Type A, 19-pole) to one of the 
HDMI sockets of the TV set.
An HDMI device is connected to the side HDMI socket (e.g. camcorder) 
in the same way as shown in the figure.
If a DVI/HDMI adapter cable is used, the corresponding sound can be 
piped through the AUDIO IN (analogue) or AUDIO DIGITAL IN (digital) 
socket on the TV set (see also page 123).
Playback from the device
If the device at HDMI supports the Digital Link HD functionality, the TV set 
will automatically switch to the corresponding HDMI input after starting 
the replay at the HDMI device.
The HDMI input can also be called up manually:
Call AV selection.
Select HDMI socket.
     With  Digital Link HD-capable devices the device 
name may possibly appear in place of the connection 
name.
  OK Switch over.
Start playback on the connected HDMI device. The best 
possible format for the picture is detected and set auto-
matically.
 Remote TV switch on via Digital Link
You can select whether the TV set is to switch on automatically from 
Standby mode if a disc is played or a screen menu displayed on a Digital 
Link HD-enabled device connected to HDMI1 or HDMI2
You can find the settings in the TV Menu under Connections 
ט Other ט 
Remote TV switch on via Digital Link (see also page 111).
HDMI1
TV set
Blu-ray player
Connection example of an HDMI device (e.g. Blu-ray Player)
OK
AV SELECTION
HDMI3
HDMI2
HDMI1
PC IN
AVS
AV
VIDEO
Switch to ...
 
External devices
HDMI