LOEWE Connect 42 Full-HD+ 100 用户手册

9 -

This TV set is intended exclusively for the reception and reproduction of 
video and audio signals and designed for the home and office. It may 
not be used in rooms with high humidity (e.g. bathrooms, saunas) or 
high dust concentration (e.g. workshops). The manufacturer‘s warranty is 
only valid for use in the specified permissible environment.

If the set is used outdoors then ensure that it is protected against mois-
ture (rain, splashing water, or dew). High humidity and dust concentration 
cause creep currents in the set. This can cause electric shocks or fires.

If you have brought the set into a warm environment from the cold, then 
wait for about 1 hour before switching it on to avoid formation of con-
densation.

Do not place any objects filled with 
liquid or burning candles on the de-
vice. Protect the set against dripping 
and splashing water.

Never place the TV set in a position 
where it is exposed to vibrations. This 
can lead to material overload.

When rotating the TV set there is a 
danger of crushing between the TV 
housing and the table stand. Makes 
sure that your fingers or other objects 
are not in this area when rotating the TV set.

Only transport the device in vertical position. Grasp the device on the 
upper and lower edges of the housing.

The LCD screen is made of glass or plastic and can break if not handled 
properly.
If the LCD screen is damaged and liquid crystal is leaking, wear rubber 
gloves for handling the TV set. If there is skin contact immediately wash 
thoroughly with water.

The wrong voltage can damage the set. This equipment must only be 
connected to a mains power supply which has the same voltage and 
frequency as that specified on the rating plate; use the power cable 
provided. The mains plug of the TV set must be easily accessible so that 
the device can be disconnected from the mains at any time. When you 
unplug the mains plug, do not pull on the cable rather pull on the plug 
housing. The cable in the mains plug could be damaged and cause a 
short circuit the next time it is plugged in.

Lay out the power cable in such a manner that it cannot be damaged. 
The power cable may not be kinked or laid over sharp edges, stepped 
on or exposed to chemicals; The latter also applies for the entire equip-
ment. A power cable with damaged insulation can cause electrical shock 
and is a fire hazard.

The  vent slots on the rear panel of the set must always be kept free. 
Please do not place newspapers or cloths on/over the TV.

At least 10 cm clearance must be 
left at the sides and top for air 
circulation if the TV set is placed or 
hung in a cabinet or a shelf.

Like any electronic device, your TV 
set requires air for cooling. Ob-
struction of the air circulation can 
cause fires.

The set is suitable for different instal-
lation solutions. See the instructions 
for assembly for the different instal-
lation solutions.

Stand the TV set with the table or floor stand only on a level, sturdy, 
horizontal base. Particularly ensure that the set does not protrude to the 
front when placed in or on pieces of furniture.

Set up the device where it is not exposed to direct sunlight and where it 
is not exposed to additional warming through heating elements.

Prevent metal items, needles, paper clips, liquids, wax, or similar items, 
from getting into the interior of the device through the vent slots in the 
rear panel. Such objects can cause short circuits in the set, which could 
possibly cause a fire.

If something should get into the interior of the set then immediately 
unplug the mains plug of the device and contact customer service for 
more information.

For your safety

C   O   N   N   E   C   T

C   O   N   N   E   C   T

C   O   N   N   

C   O   N   N 

E   C   T