Kenwood TM-G707 用户手册
58
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
S-METER SQUELCH
By activating S-meter Squelch, the squelch does not
open until a signal with the same or greater strength
than the S-meter setting is received. This function is
useful to eliminate constantly resetting the squelch when
receiving weak stations that you have no interest in.
open until a signal with the same or greater strength
than the S-meter setting is received. This function is
useful to eliminate constantly resetting the squelch when
receiving weak stations that you have no interest in.
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 14 (S.SQL).
3 Press [OK], then turn the Tuning control to switch the
function ON (or OFF).
4 Press [OK] again to complete the setting and exit
Menu mode.
• The S-meter setting segments appear.
5 Turn the SQL control to select the desired S-meter
setting from the 7 levels.
■
Squelch Hang Time
When using S-meter Squelch, you may want to adjust
the time interval between when the received signals
drop and when the squelch closes.
the time interval between when the received signals
drop and when the squelch closes.
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 15 (HNG.T).
3 Press [OK], then turn the Tuning control to select
from OFF (default), 125 ms, 250 ms and 500 ms.
4 Press [OK] again to complete the setting and exit
Menu mode.
Note:
Menu No. 15 is selectable only when the S-meter Squelch is
ON.