Motorola two-way radio 用户手册

Interference Eliminator Codes help minimize interference by providing a choice of
code combinations. Your radio has 99 Interference Eliminator Codes. Codes 1-38
are the standard codes that appear on other FRS/GMRS radios. Codes 39-99 are
additional digital codes added for superior interference protection.

To set the code for a channel:

1. Press

until the code starts to flash.

2. Press 

or 

to select the code.

3. Press 

to save the code setting.

You can set a different code for each channel using this procedure. An extended
press of 

or 

allow you to scroll through the Interference Eliminator Codes rap-

idly so you can quickly reach the code you want.

Note: You must set the Interference Eliminator Code to 

on a radio that uses

Interference Eliminator Codes to communicate with radios that do not have
Interference Eliminator Codes.

To prevent accidental transmissions and save battery life, the radio emits a
continuous warning tone and stops transmitting if you press 

for 60 continuous

seconds.